tungsten-logo
Sign In
Elven Architecture with AstreaPixie Mix
astreapixie-mix:v1.6
evevalentine2017
evevalentine2017
·
12/18/2023
370
Input
prompt
Specify things to see in the output
(masterpiece, best quality:1.2), (absurdres, highres, ultra-detailed), (highly detailed:1.3), <lora:wrench_elven_arch-04:0.85>, wrench_elven_arch, indoors, arch, water, Ultra-detail, (highres:1.1), best quality, (masterpiece:1.3), cinematic lighting,, volumetric light, <lora:epiCRealismHelper:1>
negative_prompt
Specify things to not see in the output
fcNeg-neg, (worst quality:1.6, low quality:1.6), (zombie, sketch, interlocked fingers, comic)
num_outputs
Number of output images
4
width
Output image width
768
height
Output image height
768
enhance_face_with_adetailer
Enhance face with adetailer
true
enhance_hands_with_adetailer
Enhance hands with adetailer
false
adetailer_denoising_strength
1: completely redraw face or hands / 0: no effect on output images
0.55
detail
Enhance/diminish detail while keeping the overall style/character
0
brightness
Adjust brightness
0
contrast
Adjust contrast
0
saturation
Adjust saturation
0
seed
Same seed with the same prompt generates the same image. Set as -1 to randomize output.
2529402188
input_image
Base image that the output should be generated from. This is useful when you want to add some detail to input_image. For example, if prompt is "sunglasses" and input_image has a man, there is the man wearing sunglasses in the output.
input_image_redrawing_strength
How differ the output is from input_image. Used only when input_image is given.
0.55
reference_image
Image with which the output should share identity (e.g. face of a person or type of a dog)
reference_image_strength
Strength of applying reference_image. Used only when reference_image is given.
1
reference_pose_image
Image with a reference pose
reference_pose_strength
Strength of applying reference_pose_image. Used only when reference_pose_image is given.
1
reference_depth_image
Image with a reference depth
reference_depth_strength
Strength of applying reference_depth_image. Used only when reference_depth_image is given.
1
sampler
Sampler type
DPM++ SDE
samping_steps
Number of denoising steps
30
cfg_scale
Scale for classifier-free guidance
8.5
clip_skip
The number of last layers of CLIP network to skip
2
vae
Select VAE
clearvae_v2.3_fp16.safetensors
lora_1
LoRA file. Apply by writing the following in prompt: <lora:FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE>
epiCRealismHelper.safetensors
lora_2
LoRA file. Apply by writing the following in prompt: <lora:FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE>
wrench_elven_arch-04.safetensors
lora_3
LoRA file. Apply by writing the following in prompt: <lora:FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE>
embedding_1
Embedding file (textural inversion). Apply by writing the following in prompt or negative prompt: (FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE)
fcNeg-neg.pt
embedding_2
Embedding file (textural inversion). Apply by writing the following in prompt or negative prompt: (FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE)
embedding_3
Embedding file (textural inversion). Apply by writing the following in prompt or negative prompt: (FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE)
disable_prompt_modification
Disable automatically adding suggested prompt modification. Built-in LoRAs and trigger words will remain.
false
Output
https://files.tungsten.run/uploads/f650738aee3244618f62e038dd98e30d/00000-2529402188.webp
https://files.tungsten.run/uploads/c4e3847808e847bbb4c8ebe67eca534d/00001-2529402189.webp
https://files.tungsten.run/uploads/aa246f0b0b26467eb35ba8569c4fbfde/00002-2529402190.webp
https://files.tungsten.run/uploads/99b08425c8b24027bcc2d8ee393f5f49/00003-2529402191.webp
Finished in 123.5 seconds
Setting up the model... Processing... Loading VAE weight: models/VAE/clearvae_v2.3_fp16.safetensors Full prompt: (masterpiece, best quality:1.2), (absurdres, highres, ultra-detailed), (highly detailed:1.3), <lora:wrench_elven_arch-04:0.85>, wrench_elven_arch, indoors, arch, water, Ultra-detail, (highres:1.1), best quality, (masterpiece:1.3), cinematic lighting,, volumetric light, <lora:epiCRealismHelper:1> Full negative prompt: fcNeg-neg, (worst quality:1.6, low quality:1.6), (zombie, sketch, interlocked fingers, comic) 0%| | 0/30 [00:00<?, ?it/s] 3%|▎ | 1/30 [00:03<01:34, 3.27s/it] 7%|▋ | 2/30 [00:06<01:36, 3.44s/it] 10%|█ | 3/30 [00:10<01:34, 3.50s/it] 13%|█▎ | 4/30 [00:14<01:32, 3.55s/it] 17%|█▋ | 5/30 [00:17<01:31, 3.64s/it] 20%|██ | 6/30 [00:21<01:26, 3.62s/it] 23%|██▎ | 7/30 [00:24<01:17, 3.37s/it] 27%|██▋ | 8/30 [00:27<01:16, 3.48s/it] 30%|███ | 9/30 [00:31<01:13, 3.51s/it] 33%|███▎ | 10/30 [00:34<01:04, 3.24s/it] 37%|███▋ | 11/30 [00:37<01:03, 3.36s/it] 40%|████ | 12/30 [00:41<01:00, 3.35s/it] 43%|████▎ | 13/30 [00:44<00:57, 3.39s/it] 47%|████▋ | 14/30 [00:48<00:56, 3.50s/it] 50%|█████ | 15/30 [00:51<00:50, 3.36s/it] 53%|█████▎ | 16/30 [00:54<00:46, 3.34s/it] 57%|█████▋ | 17/30 [00:58<00:43, 3.38s/it] 60%|██████ | 18/30 [01:01<00:41, 3.43s/it] 63%|██████▎ | 19/30 [01:04<00:35, 3.22s/it] 67%|██████▋ | 20/30 [01:06<00:29, 2.93s/it] 70%|███████ | 21/30 [01:10<00:27, 3.04s/it] 73%|███████▎ | 22/30 [01:13<00:25, 3.16s/it] 77%|███████▋ | 23/30 [01:15<00:20, 2.96s/it] 80%|████████ | 24/30 [01:19<00:18, 3.04s/it] 83%|████████▎ | 25/30 [01:22<00:14, 3.00s/it] 87%|████████▋ | 26/30 [01:25<00:12, 3.05s/it] 90%|█████████ | 27/30 [01:28<00:09, 3.12s/it] 93%|█████████▎| 28/30 [01:31<00:06, 3.19s/it] 97%|█████████▋| 29/30 [01:34<00:02, 2.94s/it] 100%|██████████| 30/30 [01:34<00:00, 2.26s/it] 100%|██████████| 30/30 [01:34<00:00, 3.16s/it] Decoding latents in cuda:0... done in 0.96s Move latents to cpu... done in 0.02s 0: 640x640 (no detections), 8.0ms Speed: 5.0ms preprocess, 8.0ms inference, 1.6ms postprocess per image at shape (1, 3, 640, 640) [-] ADetailer: nothing detected on image 1 with 1st settings. 0: 640x640 1 face, 7.9ms Speed: 3.0ms preprocess, 7.9ms inference, 11.7ms postprocess per image at shape (1, 3, 640, 640) 0%| | 0/17 [00:00<?, ?it/s] 6%|▌ | 1/17 [00:01<00:17, 1.08s/it] 12%|█▏ | 2/17 [00:01<00:12, 1.15it/s] 18%|█▊ | 3/17 [00:02<00:11, 1.20it/s] 24%|██▎ | 4/17 [00:03<00:10, 1.20it/s] 29%|██▉ | 5/17 [00:04<00:10, 1.19it/s] 35%|███▌ | 6/17 [00:04<00:08, 1.29it/s] 41%|████ | 7/17 [00:05<00:06, 1.44it/s] 47%|████▋ | 8/17 [00:06<00:06, 1.38it/s] 53%|█████▎ | 9/17 [00:07<00:06, 1.33it/s] 59%|█████▉ | 10/17 [00:07<00:04, 1.42it/s] 65%|██████▍ | 11/17 [00:08<00:04, 1.39it/s] 71%|███████ | 12/17 [00:09<00:03, 1.40it/s] 76%|███████▋ | 13/17 [00:09<00:02, 1.37it/s] 82%|████████▏ | 14/17 [00:10<00:02, 1.35it/s] 88%|████████▊ | 15/17 [00:11<00:01, 1.31it/s] 94%|█████████▍| 16/17 [00:12<00:00, 1.43it/s] 100%|██████████| 17/17 [00:12<00:00, 1.87it/s] 100%|██████████| 17/17 [00:12<00:00, 1.40it/s] Decoding latents in cuda:0... done in 0.23s Move latents to cpu... done in 0.0s 0: 640x640 (no detections), 8.8ms Speed: 3.4ms preprocess, 8.8ms inference, 1.0ms postprocess per image at shape (1, 3, 640, 640) [-] ADetailer: nothing detected on image 3 with 1st settings. 0: 640x640 (no detections), 8.1ms Speed: 2.9ms preprocess, 8.1ms inference, 0.8ms postprocess per image at shape (1, 3, 640, 640) [-] ADetailer: nothing detected on image 4 with 1st settings. Finished.
prompt
Specify things to see in the output
(masterpiece, best quality:1.2), (absurdres, highres, ultra-detailed), (highly detailed:1.3), <lora:wrench_elven_arch-04:0.85>, wrench_elven_arch, indoors, arch, water, Ultra-detail, (highres:1.1), best quality, (masterpiece:1.3), cinematic lighting,, volumetric light, <lora:epiCRealismHelper:1>
negative_prompt
Specify things to not see in the output
fcNeg-neg, (worst quality:1.6, low quality:1.6), (zombie, sketch, interlocked fingers, comic)
num_outputs
Number of output images
4
width
Output image width
768
height
Output image height
768
enhance_face_with_adetailer
Enhance face with adetailer
true
enhance_hands_with_adetailer
Enhance hands with adetailer
false
adetailer_denoising_strength
1: completely redraw face or hands / 0: no effect on output images
0.55
detail
Enhance/diminish detail while keeping the overall style/character
0
brightness
Adjust brightness
0
contrast
Adjust contrast
0
saturation
Adjust saturation
0
seed
Same seed with the same prompt generates the same image. Set as -1 to randomize output.
2529402188
input_image
Base image that the output should be generated from. This is useful when you want to add some detail to input_image. For example, if prompt is "sunglasses" and input_image has a man, there is the man wearing sunglasses in the output.
input_image_redrawing_strength
How differ the output is from input_image. Used only when input_image is given.
0.55
reference_image
Image with which the output should share identity (e.g. face of a person or type of a dog)
reference_image_strength
Strength of applying reference_image. Used only when reference_image is given.
1
reference_pose_image
Image with a reference pose
reference_pose_strength
Strength of applying reference_pose_image. Used only when reference_pose_image is given.
1
reference_depth_image
Image with a reference depth
reference_depth_strength
Strength of applying reference_depth_image. Used only when reference_depth_image is given.
1
sampler
Sampler type
DPM++ SDE
samping_steps
Number of denoising steps
30
cfg_scale
Scale for classifier-free guidance
8.5
clip_skip
The number of last layers of CLIP network to skip
2
vae
Select VAE
clearvae_v2.3_fp16.safetensors
lora_1
LoRA file. Apply by writing the following in prompt: <lora:FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE>
epiCRealismHelper.safetensors
lora_2
LoRA file. Apply by writing the following in prompt: <lora:FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE>
wrench_elven_arch-04.safetensors
lora_3
LoRA file. Apply by writing the following in prompt: <lora:FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE>
embedding_1
Embedding file (textural inversion). Apply by writing the following in prompt or negative prompt: (FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE)
fcNeg-neg.pt
embedding_2
Embedding file (textural inversion). Apply by writing the following in prompt or negative prompt: (FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE)
embedding_3
Embedding file (textural inversion). Apply by writing the following in prompt or negative prompt: (FILE_NAME_WITHOUT_EXTENSION:MAGNITUDE)
disable_prompt_modification
Disable automatically adding suggested prompt modification. Built-in LoRAs and trigger words will remain.
false
https://files.tungsten.run/uploads/f650738aee3244618f62e038dd98e30d/00000-2529402188.webp
https://files.tungsten.run/uploads/c4e3847808e847bbb4c8ebe67eca534d/00001-2529402189.webp
https://files.tungsten.run/uploads/aa246f0b0b26467eb35ba8569c4fbfde/00002-2529402190.webp
https://files.tungsten.run/uploads/99b08425c8b24027bcc2d8ee393f5f49/00003-2529402191.webp
Finished in 123.5 seconds
Setting up the model... Processing... Loading VAE weight: models/VAE/clearvae_v2.3_fp16.safetensors Full prompt: (masterpiece, best quality:1.2), (absurdres, highres, ultra-detailed), (highly detailed:1.3), <lora:wrench_elven_arch-04:0.85>, wrench_elven_arch, indoors, arch, water, Ultra-detail, (highres:1.1), best quality, (masterpiece:1.3), cinematic lighting,, volumetric light, <lora:epiCRealismHelper:1> Full negative prompt: fcNeg-neg, (worst quality:1.6, low quality:1.6), (zombie, sketch, interlocked fingers, comic) 0%| | 0/30 [00:00<?, ?it/s] 3%|▎ | 1/30 [00:03<01:34, 3.27s/it] 7%|▋ | 2/30 [00:06<01:36, 3.44s/it] 10%|█ | 3/30 [00:10<01:34, 3.50s/it] 13%|█▎ | 4/30 [00:14<01:32, 3.55s/it] 17%|█▋ | 5/30 [00:17<01:31, 3.64s/it] 20%|██ | 6/30 [00:21<01:26, 3.62s/it] 23%|██▎ | 7/30 [00:24<01:17, 3.37s/it] 27%|██▋ | 8/30 [00:27<01:16, 3.48s/it] 30%|███ | 9/30 [00:31<01:13, 3.51s/it] 33%|███▎ | 10/30 [00:34<01:04, 3.24s/it] 37%|███▋ | 11/30 [00:37<01:03, 3.36s/it] 40%|████ | 12/30 [00:41<01:00, 3.35s/it] 43%|████▎ | 13/30 [00:44<00:57, 3.39s/it] 47%|████▋ | 14/30 [00:48<00:56, 3.50s/it] 50%|█████ | 15/30 [00:51<00:50, 3.36s/it] 53%|█████▎ | 16/30 [00:54<00:46, 3.34s/it] 57%|█████▋ | 17/30 [00:58<00:43, 3.38s/it] 60%|██████ | 18/30 [01:01<00:41, 3.43s/it] 63%|██████▎ | 19/30 [01:04<00:35, 3.22s/it] 67%|██████▋ | 20/30 [01:06<00:29, 2.93s/it] 70%|███████ | 21/30 [01:10<00:27, 3.04s/it] 73%|███████▎ | 22/30 [01:13<00:25, 3.16s/it] 77%|███████▋ | 23/30 [01:15<00:20, 2.96s/it] 80%|████████ | 24/30 [01:19<00:18, 3.04s/it] 83%|████████▎ | 25/30 [01:22<00:14, 3.00s/it] 87%|████████▋ | 26/30 [01:25<00:12, 3.05s/it] 90%|█████████ | 27/30 [01:28<00:09, 3.12s/it] 93%|█████████▎| 28/30 [01:31<00:06, 3.19s/it] 97%|█████████▋| 29/30 [01:34<00:02, 2.94s/it] 100%|██████████| 30/30 [01:34<00:00, 2.26s/it] 100%|██████████| 30/30 [01:34<00:00, 3.16s/it] Decoding latents in cuda:0... done in 0.96s Move latents to cpu... done in 0.02s 0: 640x640 (no detections), 8.0ms Speed: 5.0ms preprocess, 8.0ms inference, 1.6ms postprocess per image at shape (1, 3, 640, 640) [-] ADetailer: nothing detected on image 1 with 1st settings. 0: 640x640 1 face, 7.9ms Speed: 3.0ms preprocess, 7.9ms inference, 11.7ms postprocess per image at shape (1, 3, 640, 640) 0%| | 0/17 [00:00<?, ?it/s] 6%|▌ | 1/17 [00:01<00:17, 1.08s/it] 12%|█▏ | 2/17 [00:01<00:12, 1.15it/s] 18%|█▊ | 3/17 [00:02<00:11, 1.20it/s] 24%|██▎ | 4/17 [00:03<00:10, 1.20it/s] 29%|██▉ | 5/17 [00:04<00:10, 1.19it/s] 35%|███▌ | 6/17 [00:04<00:08, 1.29it/s] 41%|████ | 7/17 [00:05<00:06, 1.44it/s] 47%|████▋ | 8/17 [00:06<00:06, 1.38it/s] 53%|█████▎ | 9/17 [00:07<00:06, 1.33it/s] 59%|█████▉ | 10/17 [00:07<00:04, 1.42it/s] 65%|██████▍ | 11/17 [00:08<00:04, 1.39it/s] 71%|███████ | 12/17 [00:09<00:03, 1.40it/s] 76%|███████▋ | 13/17 [00:09<00:02, 1.37it/s] 82%|████████▏ | 14/17 [00:10<00:02, 1.35it/s] 88%|████████▊ | 15/17 [00:11<00:01, 1.31it/s] 94%|█████████▍| 16/17 [00:12<00:00, 1.43it/s] 100%|██████████| 17/17 [00:12<00:00, 1.87it/s] 100%|██████████| 17/17 [00:12<00:00, 1.40it/s] Decoding latents in cuda:0... done in 0.23s Move latents to cpu... done in 0.0s 0: 640x640 (no detections), 8.8ms Speed: 3.4ms preprocess, 8.8ms inference, 1.0ms postprocess per image at shape (1, 3, 640, 640) [-] ADetailer: nothing detected on image 3 with 1st settings. 0: 640x640 (no detections), 8.1ms Speed: 2.9ms preprocess, 8.1ms inference, 0.8ms postprocess per image at shape (1, 3, 640, 640) [-] ADetailer: nothing detected on image 4 with 1st settings. Finished.