About this version

An intermediate test model. I decided to publish it. I recommend using DMD2 Speed ​​​​LoRA [SDXL, Pony, Illustrated]. For correct generation, be sure to set Clip skip=2, otherwise people's faces will break (although this is not certain). The model doesn't like brackets in tooltips, but not always. If people's faces break during normal image generation, try changing the sampling step and CFG scale.

Asap

When using DMD2 Speed ​​LoRA, I use the following settings:

Clip Skip: 1 or 2

Steps: 9 (smaller values ​​are possible)

LoRA Weight: 0.7 or 1.0

Sampler: LCM

Scheduler: Normal

Compression Generator: 1.2 or 1.4

Noise Multiplier for img2img: 1.1

I enable ADetailer but disable the ADetailer detector.

Three settings are available for normal generation.

1.

Skip Clip: 1 or 2

Sampler: DPM++ 2M SDE

Templates: Karras

Steps: 42

CFG: 5.5

Noise Multiplier for img2img: 1.1

I enable ADetailer

The ADetailer detector for "face_ yolov8n.pt ", but you can use any other detector.

2.

Skip Clip: 1 or 2

Sampler: DPM++ 2M SDE

Templates: Karras

Steps: 31

CFG: 4.0

Noise Multiplier for img2img: 1.1

I enable ADetailer

The ADetailer detector for "face_ yolov8n.pt ", but you can use any other detector.

3.

Skip Clip: 1 or 2

Sampler: DPM++ 2M SDE

Templates: Karras

Steps: 30

CFG: 6.0

Noise Multiplier for img2img 1.1

I enable ADetailer

Enable the ADetailer detector "face_ yolov8n.pt ", but any other detector will do.

I'm enhancing the image.

Recommended Settings

Highres.fix: Scaling 1.5

Scaling 4x_foolhardy_Remacri (1xDeNoise_realplksr_otf or OmniSR_X4_DIV2K,4xLSDIRplusC)

High Resolution Steps: 10

Enable ADetailer

Enable the ADetailer detector "face_ yolov8n.pt ", but any other detector will do.

Noise reduction level: 0.1 or 0.28; 0.4; 0.48; 0.50; 0.58 (I usually use 0.1).

But feel free to experiment, no one's stopping you from using other settings!

Model by https://civitai.com/user/Dugales